Fiat Multipla Owner's Handbook Manual page 82

Re-positioning the rear seats
Make sure that the anchorage points shown in the figure are clean:
❒ insert the front hooks in the special holes on the car floor;
❒ turn the seat until it is 10 cm from the floor then let it drop.
The weight of the seat will position it and latch it to the back hooks.
When repositioning the seats, make sure you do not invert them. The
correct position of the seats is shown on the labels (see the figure) fixed
to the back of the seats:
F0G0016m
a left-hand seat
b centre seat
c right-hand seat
After refitting, the black section of the belts on the side seats should face
the outside of the car.
F0E0026m
82