Fiat Multipla Owner's Handbook Manual page 55

D - Switch to turn the compressor on and off. When
this switch is pressed it automatically starts the fan
at the first speed if knob (C) is at p. When the
compressor is on the led on the switch lights up.
E - Knob for manual air distribution selection.
If this knob is positioned to max/def, it sets the system
for defrosting/demisting.
The system is fitted with a pollen filter to clean the
incoming air. To replace this filter, refer to section
"Service schedule"
HEATING
1) Air temperature knob: pointer to the required
temperature.
2) Fan knob:
– pointer to the speed required;
– pointer to for automatic operation of the
AUTO
fan.
The system limits the fan speed until the fluid reaches
the temperature required to prevent cool air entering
the passenger compartment.
3) Air distribution knob, pointer to:
≤ to warm the feet and demist the windscreen at
the same time;
µ to warm the feet and keep the face cool
("bilevel" function);
w to generally warm the feet in the front and back.
4) Recirculation switch:
to rapidly warm the passenger compartment, press the
switch T (led on) to recirculate the air already in
the passenger compartment.
IMPORTANT For maximum heating:
❒ turn knob (A) to
;
HI
❒ turn knob (C) to 4.
DEMISTING AND/OR DEFROSTING
Air distribution knob, pointer to:
- to demist windscreen and front side windows.
55