Functions For Control Set - Art-Tech Falcon Beginner Operating Manual

FUNCTIONS FOR CONTROL SET

Throttle Max
Rudder
left
Throttle Min
Frequency Binding Switch
Charger port
MODE 2
PICTURE OF CONTROL SET CONNECTION
CH
RECEIVER
ER61-2.4GHz
GYRO ADJUSTMENT
1. Connect to
Assembling Gyro :
1. Make sure radio control system and servos are in good working condition, and the servo arms are in right
position.
2. Fix the gyro to the right place close to CG.
Dual Rate(D/R)
Trim Switch
Rudder
right
Trim
Servo reverse switch
Power/
Frequency bind
Flapron
Landing gear
Rudder
Throttle
Elevator
Aileron
tail servo
Antenna
Handle
sweepback
adjustment trim switch
Dual Rate
(D/R) Switch
Elevator down
Left Right
Aileron Aileron
Up Up
Throttle up
Hook
Power indicator
Power switch
.
1 Rudde r itinerar y adj ust ment
.
2 Gain adjustment
.
3 Connect to tail servo
4. Reverse switch for servo
.Gyro gain Connect to Ch5
5
.Gy ro signal Co nnect to Ch 4
6
www.art-tech.cn
9