Demonstration Mode - Miele W1903 User Manual

Technical Information
6.6.3

Demonstration Mode

The Demonstration Mode is commonly used in Show Rooms to simulate
an active program; by illuminating the LED's and changing
the remaining program time (W1986 only) in the display.
To activate the Demonstration Mode
1. Open the door and leave it open throughout the demonstration period.
2. Turn off the machine.
3. Turn the Program Selector Switch to the 12 o'clock position.
4. Press and hold the Start Button while turning the unit on.
5. As soon as the Rinses LED flashes, release the Start Button.
6. Turn the Program Selector Switch to Cottons 1200.
Successful accessing of the Demonstration Program is indicated by the
Rinses LED flashing & the Program Selector Switch lights up.
The Demonstration Program duration is 67 seconds. After a pause of 30
seconds the Demonstration Program will start over again.
To Interrupt the Demo Mode
Turn the Program Selector Switch to the 12 o'clock position.
To Continue the Demo Mode
Turn the Program Selector Switch to any position, other than 12 o'clock.
To cancel the Demo Mode
Turn off the machine.
To run the Demo Mode again
Turn on the machine.
Quit (without saving)
With the machine turned on, close the door.
W1900 Series Clothes Washers
62