Miele W1903 User Manual page 59

W1900 Series Clothes Washers
Technical Information
COUNTRY SETTING (Jeans)
This does not apply to USA model machines. DO NOT CHANGE.
GENTLE ACTION (Dress Shirts)
With this function activated, gentle action wash rhythms are performed
instead of original set wash rhythms. A reduced drum movement and a
longer rest period while reversing, gently washes lightly soiled fabrics.
The default setting for this function is: Without Always Gentle Action.
SUDS COOLING (Starch)
The temperature of the drain water in the Cottons very hot program can
be reduced with the addition of cool water at the end of the main wash.
This option may be chosen if the drain-line is connected to old plumbing,
plastic drainpipe systems, or is required by code.
MEMORY (Fine Rinse)
The memory feature recalls the selection of a wash options and / or spin
speed selections to a wash program. The next time the program is
selected, the previously chosen options and / or spin speed selections will
also be selected.
RINSE TEMPERATURE (Drain/Spin)
After the main wash, the washer rinses with cold water in up to three rinse
cycles. With the hot water option selected, hot rinses are activated in
Cottons and Minimum Iron Programs. Rinse two is skipped and rinses
one and three are carried out with hot water.
# OF FAULT LED's (Perma Press Cold)
The Fault Indication LED's are located at the lower right side on the
control panel. The number of fault LED's present determines the setting in
this function. Both the USA W1966 and W1986 are equipped with 4
LED's therefore this value should not be changed. DO NOT CHANGE.
COUNTRY (Perma Press 105)
The wash programs can be customized to suit the needs and habits in
different countries. The default setting is for USA, and should not be
adjusted. DO NOT CHANGE.
LOAD CONTROL (Perma Press 120)
This does not apply to USA model machines. DO NOT CHANGE.
ILLUMINATED PROGRAM SELECTOR SWITCH (Perma Press 140)
When the machine is switched on the Program Selector is illuminated and
remains lit for 5 minutes after the program has finished. If no program is
selected after the machine is switched on, the illumination goes off after
five minutes. When any button is pressed or the Program Selector is used
the switch is illuminated again. This option allows the illumination to be
turned off.
59