Taillamps, Turn Signal, Stoplamps, And Back-Up; Lamps (H3T) - Hummer 2010 H3 Owner's Manual

10-36 Vehicle Care
To replace one of these bulbs in the
taillamp assembly:
1. Open the swing-gate. See
Tailgate on page 2 7.
Passenger Side Shown
2. Remove the two screws from the
taillamp assembly.
3. Pull the taillamp assembly away
from the vehicle.
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
Ofrecido por www.electromanuales.com
5. Pull the old bulb to release it
from the socket.
6. Reverse steps 1 through 4 to
reinstall.
Taillamps, Turn Signal,
Stoplamps, and Back-Up

Lamps (H3T)

A. Stoplamp and Taillamp
B. Turn Signal Lamp
C. Back-up Lamp
To replace one of these bulbs in the
taillamp assembly:
1. Open the tailgate. See Tailgate
on page 2 7.
2. Remove the two screws from the
taillamp assembly.
3. Pull the taillamp assembly away
from the vehicle.