Hummer 2010 H3 Owner's Manual page 100

3-56 Seats and Restraints
If the position you are using
has a fixed headrest or
head restraint and you are
using a single tether, route
the tether over the headrest
or head restraint.
Ofrecido por www.electromanuales.com
If the position you are using
has a fixed headrest or
head restraint and you are
using a dual tether, route
the tether around the
headrest or head restraint.
1.4. Attach the top tether to the
anchor (A). Make sure that
you secure the top tether to
the top tether anchor and
not to the seatback
latch (B).
1.5. Push rearward on the
seatback until it locks into
its upright position. Push
and pull on the seatback to
make sure it is secured
properly.
2. Attach and tighten the lower
attachments to the lower
anchors. If the child restraint
does not have lower
attachments or the desired
seating position does not have
lower anchors, secure the child
restraint with the top tether and
the safety belts. Refer to the
child restraint manufacturer
instructions and the instructions
in this manual.
2.1. Find the lower anchors for
the desired seating
position.
2.2. Attach and tighten the lower
attachments on the child
restraint to the lower
anchors.