Warranty, Fcc, And Safety Information; Safety Precautions - Reconyx UltraFire User Manual

Warranty, FCC, CE and Safety Information
RECONYX® Limited Hardware Warranty
RECONYX® UltraFire™ cameras are warranted against manufacturers defects in materials
and workmanship for a period of two years from the date of purchase. If during this period,
through normal use, the product fails due to defects in materials or workmanship,
™
RECONYX will either repair or replace the product at our discretion.
NOTE: There is a warranty seal on your camera; if this seal is broken or tampered
with, the warranty is void.
Repair or Replacement
Buyer must obtain a Return Authorization (RA) number from RECONYX® before returning
any product(s) for repair or replacement. If RECONYX® concludes that a returned product
is not defective, Buyer will be notified, the product will be returned to Buyer at Buyer's
expense, and Buyer may be charged for examination and testing of the product.
This limited warranty is the sole warranty for hardware and software products offered by
RECONYX® and RECONYX® shall not be liable for any amounts for said products except
in compliance with this warranty.
FCC CE Certification
This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation. The Reconyx, Inc. UltraFire Digital Trail Camera has been tested and found to
comply with the emissions requirements of IEC 61000-6-3 and the immunity requirements
of IEC 61000-6-1. Reconyx, Inc. UltraFire Digital Trail Camera has been tested and found
to comply with the radiated interference requirements of Section 6.2 of the Industry Canada
ICES-003 for Class B Information Technology Equipment (ITE).

Safety Precautions

Before using the camera, please ensure that you read and understand the following safety
precautions. Always ensure that the camera is operated correctly. The safety precautions
noted in this guide are intended to instruct you in the safe and correct operation of the
camera and its accessories to prevent injuries or damage to yourself, other persons, and
equipment.
Preventing Malfunction
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other equipment generating
strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions
or corrupt image data.
www.reconyx.com 20