Reconyx UltraFire User Manual page 11

Play Videos – When you select this option, the
camera will enter into a slide show function to view
thumbnails of the videos on the memory card. The
LEFT and RIGHT directional buttons will allow you
to scroll through the thumbnails. The UP
directional button will play the video while the
DOWN directional button will allow you to delete
the video being viewed at that time. Pressing the
OK button will allow you to exit from the video
slide show and return you to the Home page.
Erase Card – When you select this option, your camera wipes your entire
memory card clean, removing all images and other information from the card.
You should not select Erase Card unless you are absolutely certain you want to
remove everything from the card.
Change Battery Type – Allows you to select what type of batteries you are using
(Lithium-LITH or Nickel Metal Hydride Rechargeable-NiMH). Choosing the
correct battery type is critical to ensuring that the camera provides you with an
accurate battery reading. Pushing the OK button once the Save field is
highlighted at the bottom of the screen will save your chosen options.
Set Date/Time – Refer to the Initial Set Up and Programming instructions earlier
in this guide regarding Date/Time programming options.
Turn Camera Off – Pressing the OK button when this field is highlighted will
immediately turn the camera off. All previously set programming options will be
saved. The camera can also be turned off at any time by holding the OK button
down for approximately 1 second.
www.reconyx.com 10