Mounting Your Camera - Reconyx UltraFire User Manual

Mounting Your Camera

The camera can be mounted to a tree by using the included adjustable bungee
cord (shown below). Simply thread the end without the loop through the camera,
then install the included bungee hook and adjust to the length needed to securely
fasten the camera to the tree. For added security, a Python™ Cable Lock by
MasterLock® can be threaded through the secondary hole also locking the
camera latch in place.
Visit our website www.reconyx.com
your camera.
Mounting Camera with Adjustable Bungee Cord (included)
We recommend that you mount your camera at a height of approximately 4 feet.
This height is optimal for detecting animals in the field of view of the camera as
well as for accessing the camera's card, batteries, and controls.
NOTE: It is highly recommended that you use a theft deterrent device such as a
Security Enclosure and a lock to help secure your camera against
possible theft when it is in the field.
TIP: Be sure to enable the Codeloc™ feature on your camera for additional
security.
13
for other options for mounting and securing
©RECONYX, Inc.