Before You Begin - Sauber powerprof SCP-9000 User Manual

1. Do not operate the vacuum cleaner too close to heaters, radiators,
and other hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp
objects from the floor or cleaning surface in order to prevent damage
to the filter.
4. When you want to pull the plug from the wall, do not unplug by pulling
on cord. To unplug, grasp the plug, not the cord.
5. If the air inlet, floor head or telescopic tube are blocked, you should
switch off the cleaner straight away and remove from mains power.
First clear the blocked substance before attempting to start the
vacuum cleaner again.
Please do not expose the electrical hose to water or clean it with water. Damaged
cables should be inspected by an authorized Sauber service representative. Do not
use the machine if damaged cables are found.
Important instructions for use of a powerhead
Leaving the machine in a stationary position for an extended period of time while the
brush roller is spinning may cause damage to your floor or carpet. Be sure not to allow
carpet edges or fringe into the brush. As with any vacuum with a rotating brush, this
machine could cause damage to loosely woven carpets or rugs, wool loop carpets,
long-piled carpets, or very soft, sensitive floor coverings. Please use the Combination
floor brush for the above mentioned floorings. We do not recommend the use of the
powerhead for cleaning old and especially valuable hand-crafted carpets. If you have
uneven flooring, the metal part underneath the machine may come in contact with the
floor, causing scratches. Please carry the machine across high thresholds.
8
POWERPROF

Before You Begin

SCP-9000