Advertisement
Advertisement
Table of Contents
Related Manuals for Sauber SG-100
Summary of Contents for Sauber SG-100
- Page 1 SG-100...
-
Page 3: Specifications
SG-100 Pro Carpet Shampooer Congratulations on the purchase of your new Sauber carpet shampooer. There are many useful features built into your carpet shampooer. We recommend that you carefully read this instruction manual to take the best advantage of these features. -
Page 4: Before You Begin
Before You Begin The cleaner must be operated in accordance with these instructions and used only for domestic household cleaning. This will ensure you obtain full benefit from your new cleaner. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately. -
Page 5: Safety Precautions And Warnings
Safety Precautions & Warnings IMPORTANT! Always ensure that the shampooer is switched off and that the power plug is disconnected from the power supply before cleaning your shampooer, when not in use, or attempting any maintenance task. WARNING! The cleaner must only be connected to an AC power supply at the voltage shown on the rating plate. - Page 6 16. Do not use to pick up flammable or FAULTS combustible liquids such as petrol or use in Consult the trouble shooting guide in this manual if areas where they may be present your carpet shampooer fails to operate properly. 17.
- Page 7 Assembling IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories! Remove the two screws from the handle insert, as shown. Insert the handle into the body of the shampooer, ensuring that the handle is pointing backwards. Secure into place with the screws provided.
-
Page 8: Preparing The Carpet
Preparing the Carpet IMPORTANT! Do not use the shampooer as a dry vacuum. Preparation Before you start cleaning with the shampooer, carefully plan where you will Vacuum carpeted surfaces thoroughly. Use start and end to avoid walking on previously a vacuum cleaner with a powerbrush for cleaned areas. - Page 9 Instructions For Use IMPORTANT! Never leave the shampooer unattended with the power switched on. Turn off the shampooer and disconnect the power cord from the power supply before emptying and filling the tanks. Do not oversaturate the carpet. WARNING! Do not use bleach. Damage to the shampooer will result. Only use the manufacturer’s recommended solution.
- Page 10 Instructions For Use (continued) Plug the power plug into the power supply. Turn on the shampooer by step on the On/Off Button located on its base. IMPORTANT! Ensure that the power cord is secured into the Cable Hock, as shown. Step onto the Handle Release Pedal to put the shampooer into the cleaning position.
- Page 11 WARNING! When the Dirty Water Tank is full, the shampooer will make an abnormal noise and the suction will cease. Switch off the shampooer and empty the Dirty Water Tank. Dirty Water Tank When the dirty water tank is full, lock the shampooer in the upright position, turn it off and remove the power plug from the power supply.
- Page 12 Instructions For Use (continued) Using the Spot Cleaner IMPORTANT! Always remove the power plug from the power socket before fitting or removing accessories. Assembly Ensure that the cleaner is secured in the upright position. Lift the Hose Connection Lid on the base of the shampooer. Insert the Spot Cleaner attachment as shown.
-
Page 13: Maintenance
Maintenance IMPORTANT! Always remove the power plug from the power socket before performing any maintenance. Cleaning or Replacing the Suction Inlet Nozzle Lift the Hose Connection Lid. Gently remove the Suction Inlet Nozzle, as shown. The nozzle can be cleaned using lukewarm water. Cleaning or Replacing the Vibrating Powerbrush Remove both the Dirty Water Tank and the Clean Water Tank... -
Page 14: Troubleshooting
Troubleshooting Problems and Solutions If you come across a problem, please use the checklist of troubleshooting tips before ringing Sauber Customer Service Australia on 1800 728 237 or New Zealand on 0800 282 288. Fault Solutions Reduced spray or no Refill the Clean Water Tank with water and solution. -
Page 15: Spare Parts
Spare Parts Description Product Code Dirty Water Tank 33155674 Clean Water Tank 33155675 31155387 Suction Inlet Nozzle 33155689 Replacement Powerbrush Spot Cleaner Attachment 31220859... -
Page 16: Year Warranty
This by an authorised Sauber Service Agent or from the use warranty is valid only in the country where the cleaner is of non-genuine parts.
Need help?
Do you have a question about the SG-100 and is the answer not in the manual?
Questions and answers
i need the book on how it works please i dont have printer so unable to get it online
can you send me a manuel out please