SJ-100 Pro Pets Bagged Vacuum Congratulations on the purchase of your new Sauber vacuum cleaner. There are many useful features built into your cleaner. We recommend that you carefully read this instruction manual for the best results. Handle Variable Speed Dial...
Before You Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately.
Page 5
IMPORTANT! Always switch off the cleaner and remove the power plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label.
Page 6
15. Ensure the appliance is disconnected from the the electrical parts, especially the electrical mains power supply before connecting the hose connections, with water or liquid cleaners. to the unit. 26. Never attempt to make any modifications 16. Do not operate or use the appliance without the electrically to the vacuum cleaner.
Page 7
Assembly IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories! LIVE PARTS within the hose, rod and Powerhead. Connecting Flexible Hose Fitting: Insert the flexible hose into the hose inlet of the vacuum. Press until it clicks into position.
Accessories Powerhead Deep-cleaning Powerhead easily removes embedded pet hair, dirt and dust. Note: not recommended for use on hard floors. WARNING! Seek advice from carpet manufacturers before using the motorised Powerhead on woollen or delicate carpets. Combination Floor Tool Perfect for hard floors or carpeted surfaces. Carpet Hard Floors Crevice Tool...
Upholstery Tool Designed to remove dust from sofas, chairs, mattresses and cushions. Mini Hand Turbo Tool Makes light work of removing pet hair from your furniture, car and upholstery. Safety Precautions: Keep hair, hands and feet away from rotating brush while the motorised brush is running.
Page 10
Instructions For Use IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories. Turning On/Off the Cleaner Unwind a sufficient length of cable. The yellow mark on the power cable shows the ideal cable length. DO NOT extend the cable beyond the red mark.
Maintenance IMPORTANT! Always remove the power plug from the power socket before performing any maintenance. Vacuum Cleaner Storage When not in use, ensure that the cleaner is disconnected from the power supply and that the cable is fully retracted. The combination floor tool can be stored in the floor park clip. The Powerhead must be stored separately.
Page 12
Remove the dust bag when it is full and replace with a new dust bag. Refit a new dust bag and reinsert the bracket and dust bag assembly by sliding it back into the machine. Gently close the cover, you will hear a ‘click’ when closed properly. Note: please ensure that the dust bag is fully inserted into the bag holder before you close the cover to avoid dust leaking from the dust bag.
Page 13
Cleaning and Replacing the Pre-Motor Filter IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories. Open the Dust Bag Cover, remove the bracket and the dust bag assembly. Gently remove the pre-motor filter. Replace with a new filter or clean as described. Note: The Pre-Motor Filter should be replaced every six months or when it becomes visibly dirty.
Page 14
Cleaning or Replacing Exhaust Filter Remove the Exhaust Grille to access the Rear Motor filter. Gently remove the Rear Motor filter as shown. Replace with a new filter or clean as described. Note: It is recommended to replace the filter every 6 months or when it becomes visibly dirty...
Page 15
Cleaning the Mini Hand Turbo Tool WARNING! Ensure that the Mini Hand Turbo Tool is disconnected from the cleaner when performing any maintenance. To remove the clear cover, the collar must be unlocked by twisting anticlockwise as shown. To unlock the rotating bristles, push the lock button on the side of the turbo brush to the downward position.
Page 16
Cleaning the Rotating Brush WARNING! Ensure that the cleaner is disconnected from the power supply and the Powerhead is disconnected from the rod before performing any maintenance. Note: The Rotating Brush must be free of debris for effective cleaning and for maximum suction. Disconnect the motorised Powerhead from the vacuum rod and turn it over to inspect the Rotating Brush.
Page 17
Turn the Powerhead upside down and remove the small screw from the centre of the Powerhead. DO NOT OPEN Release the 4 clips from the underside, allowing you to remove the bottom plate. To remove the rotating brush, lift the right side of the brush first from the Powerhead, followed by the left side, where the belt loops around the end cap.
Troubleshooting Problems and Solutions If you come across a problem, please use the checklist of troubleshooting tips before ringing Sauber Customer Service Australia on 1800 728 237 or New Zealand on 0800 282 288. Fault Solutions - Check that the power cable is inserted securely; remove from the power supply and then reinsert into the power supply.
Spare Parts Part Part Number Dust Bag 32440504 32201776 Exhaust & Inlet Filter Set 31300826 Hose Assembly 31220968 Powerhead Brush Roller 33788166 Powerhead Belt 32100175...
Page 20
2 Years Warranty PRO PETS BAGGED VACUUM Your cleaner, in the case of domestic use, has a two year (AUS) or 0800 282 288 (NZ), Monday-Friday 9am-5pm parts and labour warranty against product defects and EST. The decision to repair or replace the cleaner is at failures when the product is used in accordance with the the sole discretion of Electrical Home-Aids Pty.
Need help?
Do you have a question about the SJ-100 and is the answer not in the manual?
Questions and answers