Operating Instructions - Swift Motorhomes 2013 Owner's Service And Warranty Handbook

OPERATING INSTRUCTIONS

CONTROL PANEL 3010 613
Please read these instructions carefully before
using the boiler. For operating and installation
instructions of boiler, please see separate
instruction. These instructions are for the Alde
Compact 3010 boiler fitted in vehicles, boats
and buildings in accordance with CE no. 0845
BP0003, installation in vehicles e500 00005
and EMC e503 261. Installation and repairs
may only be carried out by a professional.
National regulations must be adhered to.
1. Starting the boiler
1. The control panel and the boiler are
switched off.
2. To start the boiler, press the On/Off button
and the start-up display is displayed. The
boiler starts with the last selected setting.
3010
A L DE H E AT ING
2. The control panel in standby mode
A. Clock
The clock shows day and time. The clock is
set under section 9 point 2.
B. Outdoor temperature
The outdoor temperature is displayed if a
sensor probe is mounted.
C. Indoor temperature
The indoor temperature is displayed
automatically.
D. Circulation pump
This symbol is displayed when the heating
pump is requested.
E. LPG bottle full / empty
This symbol is displayed when the sensor on
the cylinder changeover is connected and
activated in accordance with section 9 point 8.
F. 230 volts
This symbol is displayed when 230V is
connected to the boiler.
G. MENU button
Button for setting menu.
H. On / Off button
Shut down / turn on the boiler.
111