Extractor Hood - Swift Motorhomes 2013 Owner's Service And Warranty Handbook

8. The oven should be cleaned regularly and
any food deposits removed;
9. Failure to maintain the oven in a clean
condition could lead to deterioration of the
surface that could adversely affect the life
of the appliance and possibly result in a
hazardous situation.

Extractor hood 524

1 Operating panel
2 Light
3 Filter holder with grease filter
The extractor hood 524 serves to extract
water vapour from cooking areas in
motorhomes. The integrated halogen lamps (2)
serve to illuminate the work surface.
The fan and the lighting (2) can be switched
independently via the operating panel (1). At
the same time. The integrated grease filter
(3) prevents the extraction system from being
contaminated from inside.
Safety information, always refer to
the user instructions provided with
your motorhome
Replacing the lamps on the extractor
Lamp type: max. 10W /12V halogen with
UVStop
Always switch off the lights before replacing
the lamps! The lamps get very hot during
operation. There is a risk of being burnt. Wait
until the lamp has cooled down.
There is a risk of injury if the lamp is broken.
Remove the remainder of the lamp using
suitable tools only.
Replacing or cleaning the grease filter
Flip the front part of the grease filter
downwards.
Pull it out towards you.
Remove the filter holder
You can now exchange the filter. Fix the new
filter in place with the filter holder. Finally,
reinstall the filter unit in the reverse order.
Always switch off the fan motor before
replacing the grease filter! There is a risk of
injury when reaching inside the running fan.
1
Replacing the grease filter
2
To replace the filter, proceed according to
3
figures 8 & 9.
Flip the front part of the grease filter
downwards.
Pull it out towards you.
Remove the filter holder
You can now exchange the filter. Fix the new
filter in place with the filter holder. Finally,
reinstall the filter unit in the reverse order.
155