Audio Connector (Cn10) - Aaeon PCM-4896 User Manual

Audio connector (CN10)

The PCM-4896 provides all major audio signals on a 14-pin flat-
cable connector, CN10.
Attach the Mic In, Line In, and Audio Out to the corresponding
pins as shown in the following table.
Audio connector (CN1 0 )
Pin
1 Mic In
3
5
7
9
1 1 Audio Out Left
1 3 GND_Line out
CAUTION: Both Line-out and Speaker-out modes share
34 PCM-4896 User Manual
Signal
GND
Line In Left
Line In Right
GND
the same pair of Audio Out signal lines but
different grounds. In addition to setting up J6
on page 18, make sure you use the corre-
sponding ground signal when making the
cable by yourself.
Pin Signal
2 Reserve for future use
4 Reserve for future use
6 Reserve for future use
8 Reserve for future use
1 0 Reserve for future use
1 2 Audio Out Right
1 4 GND_Speaker out