Internal buzzer select (J1)
Internal buzzer select (J1 )
J 1
Clear CMOS (J4)
You can use J4 to clear the CMOS data if necessary. To reset the
CMOS data, set J4 to 2-3 closed for just a few seconds, and then
move the jumper back to 1-2 closed.
Clear CMOS (J4)
J4
*default
ATX Soft-Power Switch connector
(J5)
The ATX Soft-Power switch connector is a 2-pin header. Locate
the power switch cable from your system. It is a 2-pin female
connector. Plug this connector to the Soft-Power switch connector
marked J5.
Internal buzzer
1
2
Protect*
1
2
3
External speaker
1
2
Clear CMOS
1
2
3
Chapter 2 Installation 17