Table of Contents
Advertisement
Available languages
Available languages
SBE 1010 NAFTA.book Seite 5 Mittwoch, 25. Januar 2006 3:07 15
Operating Instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
7.5 Changing between drilling/impact
drilling
7.12 Torque limiter
1 Specified Conditions of Use
The machine is suitable for non-impact drilling into
metal, wood, plastic and similar materials and for
impact drilling into concrete, stone and other such
materials. Furthermore the machine is suitable for
tapping and screw driving (not SB 660).
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
2 General Safety Rules
1 WARNING! Read and understand all
instructions.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal
injury.
SAVE THESE INSTRUCTIONS.
2 Work Area
2.1 Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
2.2 Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
2.3 Keep bystanders, children, and visitors
away while operating a power tool. Distractions
can cause you to lose control.
3 Electrical Safety
3.1 Grounded tools must be plugged into an
outlet properly installed and grounded in
accordance with all codes and ordinances.
Never remove the grounding prong or modify
the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you
are in doubt as to whether the outlet is properly
grounded. If the tools should electrically
malfunction or break down, grounding provides a
low-resistance path to carry electricity away from
the user.
Applicable only to Class I (grounded) tools.
3.2 Double insulated tools are equipped with a
polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a
polarized outlet. Do not change the plug in any
way. Double insulation
the three-wire grounded power cord and
grounded power supply system.
Applicable only to Class II (double insulated) tools.
3.3 Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
ENGLISH
ENG
eliminates the need for
5
Hide quick links:
Advertisement
Chapters
Table of Contents
