Menu Screen Configurations And Functions - JVC KA-MR100G Instructions Manual

Menu Screen Configurations
and Functions
Values indicated in parentheses in the table below are default
settings.
Setting Item
SYSTEM
RESOLUTION (720), 1080
FRAME/RATE RESOLUTION: When 720 is set
(60p), 30p, 50p, 25p, 24p
RESOLUTION: When 1080 is set
(60i), 50i
LCD
CONTRAST MAX, +4, +3, +2, +1, (0), -1, -2,
-3, -4, MIN
BACKLIGHT OFF
(ON)
AUTO
DELETE
NOW CLIP NO
YES
ALL CLIP NO
YES
OK CLIP
NOW CLIP NONE
OK
ALL OK NO
YES
ALL NONE NO
YES
TC SET1
TC SOURCE (INT)
EXT
GENERATOR FREE
(RECRUN)
REGEN
DROP (NON DROP)
FRAME
DROP
Setting Values
For setting the format of the video to be recorded or played back. Make sure
that the settings are consistent with those of the camcorder. Otherwise,
recording and playback cannot be executed.
For setting the resolution.
For setting the frame rate. The configurable frame rate may vary according to
the [RESOLUTION] setting.
For setting the contrast and backlight of the memory recorder's LCD panel.
For adjusting the contrast.
OFF : Backlight is turned off at all times.
ON
AUTO: Backlight turns on when the buttons are operated. Light turns off
For deleting a clip.
● This function is disabled when recording is in progress.
● Clips indicated with an Aok markB cannot be deleted.
Deletes the currently selected clip when in the play mode. Deletes the clip that
is last recorded when in the stop or standby mode.
YES : Delete clips. (Press the [INFO/CLR] button.)
NO
Deletes all clips.
YES : Delete clips. (Press the [INFO/CLR] button.)
NO
For important clips or clips that you do not want to delete, specify them as AOK
clipB. Upon specifying a clip as an AOK clipB, an Aok markB will appear to the
right of the clip name on the clip selection screen.
For specifying a selected clip as an AOK clipB when in the playback mode. For
specifying the clip that is last recorded as an AOK clipB when in the stop or
standby mode.
NONE: Do not specify an AOK clipB. (Press the [PLAY/STILL] button.)
OK
For specifying all clips as AOK clipsB.
YES : Specify as AOK clipsB. (Press the [INFO/CLR] button.)
NO
Cancels all AOK clipB specifications.
YES : Cancel AOK clipB specifications. (Press the [INFO/CLR] button.)
NO
For configuring settings related to the time code of the memory recorder.
For selecting the source of the time code.
INT
EXT : The time code runs according to the value of the time code from the
When [EXT] is selected, make sure to set the [TC GENE.] switch of the
camcorder to AFREEB.
For selecting the run mode of the time code generator.
● Setting is enabled when [TC SOURCE] is set to AINTB.
FREE
RECRUN : The time code runs according to the preset value when in the
REGEN
For selecting the non drop frame or drop frame mode.
● Setting is enabled when [TC SOURCE] is set to AINTB.
● Setting is enabled when the frame rate is set to 60 or 30.
NON DROP : Non drop frame mode
DROP
Functions
: Backlight is turned on at all times.
automatically about five seconds after the buttons are operated.
: Do not delete clips. (Press the [STOP] button.)
: Do not delete clips. (Press the [STOP] button.)
: Specify an AOK clipB. (Press the [PLAY/STILL] button.)
: Retain current settings. (Press the [STOP] button.)
: Retain current settings. (Press the [STOP] button.)
: The time code runs according to the value of the memory recorder's
time code generator.
camcorder.
: The time code runs according to the preset value in the free run
mode.
recording mode.
: The time code runs continuously according to the last time code on
the SxS memory card.
: Drop frame mode
12