Menu; Setting The Menu Screen - JVC KA-MR100G Instructions Manual

Menu

Setting the Menu Screen

[MENU] button
[PREV]button
[REV] button
Procedures for Setting Values
1 Press the [MENU] button
Menu screen
Setting item
Current setting value
2 Move the cursor (
pressing the [NEXT] or [PREV] button
3 Press the [PLAY/STILL] or [FWD] button
Current selected setting item
Cursor
Current selected setting value
Set using [PLAY/STILL] button
Return to the menu screen without setting
using [STOP] button
4 Move the cursor (
pressing the [NEXT] or [PREV] button
5 Press the [PLAY/STILL] button to confirm the
setting
● The menu screen appears after the setting is changed.
:
Memo
● When the setting screen is displayed, pressing the [STOP]
or [REV] button returns the display to the menu screen
without altering the setting value.
6 Press the [MENU] button to exit the menu screen
display
Procedures for Executing the
Utilities
1 Select a menu item to display the execution
screen of the corresponding utility
The different utility items are shown below.
● [NOW CLIP] and [ALL CLIP] of the [DELETE] setting
screen
● [ALL OK] and [ALL NONE] of the [OK CLIP] setting screen
11
[INFO/CLR] button
[PLAY/STILL] button
[FWD] button
[STOP] button
[NEXT] button
) to the item to be set by
) to the value to be set by
● [NUMBER] of the [CLIP NAME] setting screen
● [FORMAT] and [RESTORE] of the [MEDIA] setting screen
● [ALL RESET] of the [OTHERS] setting screen
Utility item being selected
Execute with [INFO/CLR] button
Return to the menu screen without
setting using [STOP] button
2 Press the [INFO/CLR] button to execute the
selected item
● When [FORMAT] or [RESTORE] is completed,
ACOMPLETEB appears on the LCD display.
● When [FORMAT] or [RESTORE] is in progress,
AEXECUTEB appears on the LCD display. If failure occurs,
AERRORB is displayed.
● After the execution message appears, the display returns
to the menu screen.
● All operations are disabled during execution of a utility.
:
Memo
● Press the [STOP] button to return to the menu screen
without executing the selected item.
Procedures for Setting Time Code/
User Bit Preset, Clip Name and
Date/Time
1 Select a menu item from Time Code/User Bit
Preset, Clip Name and Date/Time
● Time Code Preset/User Bit Preset :
[TC PRESET]/[UB PRESET] of the [TC SET2] setting
screen
● Clip Name setting :
[PREFIX] of the [CLIP NAME] setting screen
● Date/Time setting :
[DATE]/[TIME] of the [CLOCK1] setting screen
Reset to A00:00:00:00B with [INFO/CLR]
button
Current selected setting item
Set using [PLAY/STILL] button
Return to the menu screen without setting
using [STOP] button
:
Memo
● During setting of the time code, user bit or time, pressing
the [INFO/CLR] button sets all digits to "00". In the clip
name setting, the default clip name is shown.
2 Press the [FWD] or [REV] button to select the
item to set
3 Alter the value of the selected item by pressing
the [NEXT] or [PREV] button
4 Press the [PLAY/STILL] button to confirm the
new value
● The menu screen appears after the setting is changed.
:
Memo
● When the setting screen is displayed, pressing the [STOP]
button returns the display to the menu screen without
altering the setting value.