Upper/Main Seat Unit Assembly/Operation/Recline/Attaching/Removing; To Release And Remove The Seat Unit; Seat Stop Screws; Single Pushchair Option - iCandy peach Instruction Manual

To release & remove the seat unit:
(Remove child before attempting this
action).
Depress the lower portion of the grey outer
ring on each side the seat unit; the frame
'jumps up'.
This function can be operated in two
separate single handed actions
simultaneously using both hands; when
both sides are disengaged the seat unit can
be removed from the chassis.
4. Upper/Main Seat Unit
assembly and operation: Is the same as
for the single pushchair: see section 1.2.
Seat stop screws x 2 - iMPOrTanT: Fit
the supplied screws to Upper/Main Seat
Unit movement mechanism as shown.
This is to restrict the main/upper seat
recline movement to prevent interference
with lower seat unit when fitted.
attaching & removing upper main seat
unit to upper position of 'Blossom'
converter frame is the same as the lower
seat unit.
note: The frame legs are grooved to
prevent incorrect orientation when fitted to
the 'Blossom' converter frame.
To recline the seat unit, depress the
centre grey buttons simultaneously and
move to desired position. (2 x positions
with Seat stop screws fitted).
iCandy peach
or
Single pushchair option: The Upper/Main
seat unit can be fitted to the chassis as per
Section1 if single pushchair required.
Securing your child using the 5-point
safety harness: Feed the buckle tongues 1
& 2 into the buckle housing 3 and click
together.
Adjust your five-point harness at the points
indicated in the direction of the double
arrows as required.
To unfasten the harness squeeze in the
buckle tongues 1 & 2 and pull out of the
buckle housing 3. Fabric loops are
provided for attaching an extra harness
complying to BS 6684.
15. Warning
To avoid serious
injury, always use the 5-point safety
harness.
All sections of the 5-point harness can
be removed from the seat fabrics if
required by rotating and releasing
through the back/baseboards.
3
1 2