Installing The Phone - VTech VSP735 User Manual

Deskset Installation

Installing the phone

Make sure you plug in the Ethernet cable before powering up the phone.
1. Lift the kickstand and flip it back. Let it rest at its maximum angle.
2. Snap the stand onto the two snap points on the deskset base.
3. Plug the end of the coiled handset cord into the jack on the left side of the
telephone.
4. Lift the deskset base to the desired angle. There are three pairs of grooves
designed to hold the phone at different angles for optimum visibility.
5. Snap the kickstand into the desired grooves until it locks into place.
16