System Management; Time: Setting System Time - Thecus N8800SAS User Manual

Truncate All Log File
The number of lines per
page □
Sort Ascending
Sort Descending
|<< < > >>|

System Management

The System Management menu gives you a wealth of settings that you can use to
configure your N8800SAS's system administration functions. You can set up system
time, system notifications, and even upgrade firmware from this menu.

Time: Setting system time

From the time menu, choose the Time item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on the N8800SAS with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Time
Item
Date
Time
Time Zone
Act as NTP Server
Sync with external NTP
Server
WARNING
Clear all log files.
Specify desired number of lines to display per page.
Shows logs by date in ascending order.
Shows logs by date in descending order.
Use the forward ( > >>| ) and backward ( |<< < ) buttons to
browse the log pages.
Re-loading logs.
Description
Sets the system date.
Sets the system time.
Sets the system time zone.
Select Enable to synchronize with the NTP server.
Select Disable to close the NTP server synchronization.
Select YES to allow the N8800SAS to synchronize with an NTP
server of your choice. Press Apply to change.
If an NTP server is selected, please make sure your N8800SAS's network has
been setup to access the NTP server.
29