Intercom Calls; Calling Other Stations; Answering Intercom Calls; Voice Announce Mode - Samsung DS 24D User Manual

Keyset dcs system
Table of Contents

Advertisement

CALLING OTHER STATIONS

Dial the extension number or group number.
Wait for the party to answer. If you hear a brief tone burst instead of ring-
back tone, the station you called is set for Voice Announce or Auto
Answer. Begin speaking immediately after the tone.
Finish the call by replacing the handset or pressing the ANS/RLS key.
NOTES:
1. If you have a DSS key assigned to an extension or station group, you
may press this key instead of dialling the number.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKER key before you begin dialling.

ANSWERING INTERCOM CALLS

When your keyset rings, simply lift the handset—OR—press the ANS/RLS
or SPEAKER key to be connected to the calling station.
Finish the call by replacing the handset or pressing the ANS/RLS or
SPEAKER key.
See Ring Preference under Customizing Your Keyset.

VOICE ANNOUNCE MODE

(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and you will hear the caller's announcement.
Press ANS/RLS or SPEAKER to turn on the microphone and speak
handsfree—OR— lift the handset to reply.
To finish the call, replace the handset or press the ANS/RLS or SPEAK-
ER key.

AUTO ANSWER MODE

(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and then automatically answer the call.
10

INTERCOM CALLS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Falcon

Table of Contents