Outside Calls; Making An Outside Call; Answering An Outside Call; Universal Answer - Samsung DS 24D User Manual

MAKING AN OUTSIDE CALL

• Lift the handset and press an idle outside line button, line group button
or dial a line access code to receive dial tone—OR—press an idle outside
line button, line group button or dial a line access code to receive dial
tone through the speaker—OR—press SPEAKER receive intercom dial
tone and dial a line access code.
• Dial the telephone number.
• Finish the call by replacing the handset or pressing the ANS/RLS key.
NOTE: You will receive No More Calls tone when you attempt to make a call
and there is no key available for that line.
• If Least Cost Routing is enabled on your phone system, this button may
be labeled LCR or accessed by dialling an access code (usually 0).
• If your system is programmed to require an authorization code before
making a call, dial
• If your system is programmed to require an account code before mak-
ing a call, press the ACCT button or dial 47 plus a valid code, press the
ACCT button again and then select a C.O. line.
For more information on authorization and account codes, see your system
administrator.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key before dialling.

ANSWERING AN OUTSIDE CALL

• Lift the handset and you are automatically connected to the ringing call.
See Ring Preference under Customizing Your Keyset— OR—press the
ANS/RLS or SPEAKER key to automatically answer on the speaker-
phone.
NOTE: If a call is flashing at your keyset but not ringing, you must press the
flashing button to answer.

UNIVERSAL ANSWER

Outside lines may be programmed to ring a general alerting device. To an-
swer calls ringing this device, dial 67 or press the UA key. This device can
operate in the Day or Night mode.
8

OUTSIDE CALLS

plus a valid code before selecting a C.O. line.