Voicemail Quick Reference Guide; Placing Calls; Outside Calls; Internal Calls - Samsung iDCS 28D Quick Reference Manual

VOICEMAIL QUICK REFERENCE GUIDE

ACCESSING YOUR MAILBOX
(Subscriber Services Menu)
FROM YOUR DESK
MESSAGE
Press the button labeled
Enter your Password: ____________________
(Default Password: 0000)
FROM OFF-SITE (HOME, CELL PHONE)
Dial the phone number that is answered by the VOICEMAIL________________
(Your Company's Main Greeting)
#
At the Main Greeting dial
(Subscriber and Mailbox Number usually match your extension number)
Enter your Password: ____________________
(Default Password: 0000)
FROM ANOTHER SUBSCRIBER'S PHONE
MESSAGE
Press the button labeled
#
Dial followed by and your Extension / Mailbox Number.
(You will be prompted to enter your password)
Enter your Password: ____________________
(Default Password: 0000)
ALTERNATE OFF-SITE FOR DID USERS (HOME, CELL PHONE)
Dial your DID phone number.
(Your Personal Greeting will answer in approximately 4-6 rings)
During your Personal Greeting dial
(Default Password: 0000)
plus your Subscriber (or Mailbox) number.
.
#
directly followed by your password.
9

PLACING CALLS

OUTSIDE CALLS

To place a call to an outside party:
!
Lift the handset.
! Press an idle outside line button, line group button, or dial
to receive dial tone.
! Dial the telephone number.
! Replace the handset or press the
NOTE: To call preprogrammed speed dial external numbers, lift the handset and press
the appropriate key.

INTERNAL CALLS

To place a call to another extension at your location:
! Lift the handset.
! Dial the extension number or group number.
!
Wait for the party to answer. If you hear a brief tone burst instead of ring-back
tone, the station called is set for Voice Announce or Auto Answer. Begin speaking
after the tone.
! Replace the handset or press the

SPEAKERPHONE CALLS

Your Samsung telephone has full speakerphone capability. This feature is used for both
internal and external calls. To activate this feature:
SPEAKER
! Press the key.
! Place an internal or external call.
SPEAKER
! Press key to disconnect the call.
NOTE: The handset can be used at any time during the conversation. To resume handsfree
SPEAKER
operation, press the
9
for a line access code
ANS/RLS
key when the call is completed.
ANS/RLS
key when the call is completed.
key, and replace the handset.
2