Hardware Introduction; Appearance; Hardware Function - Qstarz BT-Q1200 User Manual

Hardware Introduction

5.

5-1. Appearance

1. Power jack (mini USB type)
2. Power Button (ON/OFF/Enable LOG mode/Disable LOG mode)
3. Battery status LED (Red/Green)
4. Bluetooth status LED (Blue)
5. GPS status LED (Orange)
6. LOG status LED (Blue)
7. Internal antenna
8. Solar panel (Auxiliary power source)

5-2. Hardware Function

Hardware Function
Power Jack
Power Button (On)
Power Button (Off)
Power Button
(Enable Log mode)
Power Button
(Disable Log mode)
Take the power cable and connect it to the power jack
(mini USB type) for charging only
Press power button and hold for 3 sec to power
BT-Q1200 on.
Press power button and hold for 3 sec to power
BT-Q1200 off
After power BT-Q1200 on, press power button once to
enable log mode. Then BT-Q1200 would start logging
with the blinking LOG status LED (blue).
Press power button again to disable log mode. The LOG
status LED (blue) would be off, and stop logging.
5
BT-Q1200 Super 99
Description
®
GPS Travel Recorder