Led Indicators - Qstarz BT-Q1200 User Manual

- Charging your battery
For the first time using the BT-Q1200, please
charge battery until it is fully charged. Take
the power cable and connect it to the power
jack (mini USB type) and recharge through
USB cable, travel charger, or car cigarette
adaptor. This will begin to charge the battery.
Charging time is about 3 hours typically.
- When the Power LED is Red, battery power is low status. Please recharge.
- When the Power LED is Green, the battery is under charging mode.
- When the Power LED is blinking, the battery is fully charged.

5-4. LED Indicators

LED Status
Power
(Red/Green)
Bluetooth
(Blue)
GPS
(Orange)
Log (Blue)
Flash
Low Power (Red)
Fully charged (Green)
Flash per 2 sec.: Bluetooth
connected and transmitting
Mode
Flash per 5 sec.: Power
saving mode
Flash per 1 sec.(Orange):
GPS position is fixed,
Navigation
Enable Log mode
BT-Q1200 Super 99
Recharging
(Green)
Not
connected
/Pairing
Detecting
Satellite, GPS
position not
fix
8
®
GPS Travel Recorder
ON OFF
GPS not
powered
GPS not
powered
Disable
Log mode