Start The Software Utility - Qstarz BT-Q1200 User Manual

®
BT-Q1200 Super 99 GPS Travel Recorder

7-3. Start the software utility

NOTE 1:
Before starting the software utility, please make sure that the USB driver and the
software utility has been installed properly. And also, make sure that BT-Q1200
is already connected to your PC by mini USB cable, power it on, and switch it to
start logging or BT-Q1200 would enter sleep mode after few minutes.
NOTE 2:
PC Utility V3 only supports BT-Q1200. Any intention to use PC Utility V3
connecting GPS units other than BT-Q1200 would result in software
disconnection automatically.
1. Click from <Start> \ <All Programs> \ <Qstarz Travel Recorder V3> \ Travel
Recorder PC Utility V3.
2. < CONFIGURATION > \ <Connection>
15