Access Codes - GE Simon XT Quick User Manual

Access Codes

Master Access Code
The master code is the only code that can add and delete other user codes and perform other various
functions (such as entering date and time) on the alarm system. The master code can be changed,
but cannot be deleted.
To change the Master Access Code:
1. Press OK to enter the System Menu.
2. Scroll up/down to System Programming and press OK.
3. The panel will display Enter Code.
4. Enter the master code and press OK.
5. Scroll up/down to Access Codes and press OK.
6. Scroll up/down to Master Code and press OK.
7. The current master code will flash.
8. Enter the new code you wish to use and press OK.
9. Press the STATUS button three times to exit.
User Access Codes
The system will allow up to eight individual user codes. As codes are added and deleted, keep a list
in a safe location for reference. An accurate list will help track codes as future changes are made.
To Add or Change a User Access Code:
1. Press OK to enter the System Menu.
2. Scroll up/down to System Programming and press OK.
3. The panel will display Enter Code.
4. Enter the master code and press OK.
5. Scroll up/down to Access Code and press OK.
6. Scroll up/down to the user code you wish to change and press OK.
7. The current code will flash.
8. Enter the new code you wish to use and press OK.
9. Press the STATUS button 3 times to exit.
To Delete a User Access Code:
A user code can be deleted by pressing DISARM while the code is being changed.
Time Programming (System Clock)
1. Press OK to enter the System Menu.
2. Scroll up/down until the display shows Set Clock.
3. Press OK.
4. The display will show Enter Code.
5. Enter the master code and press OK.
6. Press OK again; the display will flash the Hours.
7. Scroll up/down to set the hours.
8. Press OK to accept. The display will now flash the minutes.
9. Scroll up/down to set the minutes.
10. Press OK again; the display will now flash AM/PM.
11. Scroll up/down to set AM/PM.
12. Press OK to accept. The display will now show current time and will stop flashing.
13. Press STATUS twice to exit programming.
GE Simon XT Quick User Guide Page 3