Sd Card - Gemini NCB-D200-IR User Manual

SD CARD

Important Notice
-Use the original SD memory card only. If not, data loss may happen.
-To remove the SD memory card, turn off the vehicle engine first and wait until the indication LED
light is off. Then, remove the SD memory card from the device. If not, it causes data loss.
-Timely formatting the SD memory card is required to avoid SD card error and loss.
1. Insert a SD memory card into the card slot. When the card is inserted, the brand label of
the card should be upward and the connecting terminal of the card should be downward.
2. Please push the SD memory card fully till the card is held inside.
3. If everything is fine after inserting SD memory card to the device, the voice
announcement will be heard and LED indication will be lighting.
4. When a user wants to get SD memory card from the device, push the SD memory card.
Caution: Push the SD memory card fully till the card is held inside. If not, it causes malfunction.
Do not contaminate the connection terminal of SD memory card.
* It is recommended to use original SanDisk SD memory card.
9