Emergency Recording; Volume Control Of Voice Announcement; Deleting Recording Files Of Sd Memory Card; In Vehicle Recording Off - Gemini NCB-D200-IR User Manual

Emergency Recording

When prompt recording is required under emergency situation, move the joystick downside. The recording file will
be saved in Event folder. ♣Recording will begin.

Volume Control of Voice Announcement

Volume of voice announcement will be adjusted in five steps.
Level 1 ~ Level5 Move the joystick to the right side or left side to volume up and down.

Deleting Recording Files of SD Memory Card

3Seconds
Move the stick to downside for three seconds. Then the files of SD card will be deleted and SD Card will be
formatted. ♣ All data is being deleted. It will take several minutes. Please wait for a few moments. Data deletion is
completed. In vehicle recording is selected. Recording will begin.
In Vehicle Recording 'OFF'
When one of the cameras is toward inside of the vehicle and a driver want to stop the camera recording toward inside,
user can move the joystick and stop in vehicle recording.
Only one camera toward outside will record the image. (Do not use this function with Tele/Wide Type Model)
- In Vehicle recording Off: Move the joystick upside.
- In Vehicle recording On: Move the joystick upside again.
※ Please move the joystick first to adjust the functions bellow before power is supplied.

AV Output (Install Mode)

The image captured by camera can be displayed on the extra monitor or GPS monitor through AV output of the device.
Move the function stick left and keep it. Then, power on. (When power is off, install mode will be released.)
♣ You are in install mode. TV out is now set. In vehicle recording is selected. Recording will begin..

G-Shock Sensor Sensitivity Adjustment

Turn the power off. Move the function stick right side and keep it. Then, power on. (By moving the stick left and right,
the sensitivity of G-sensor can be
Volume switch operation is needed."
♣ "The sensitivity adjustment mode is released." "In vehicle recording is selected. Recording will begin."
♣In vehicle recording is released.
adjusted. ♣ "You are in sensitivity adjustment mode. The current sensitivity is three.
When the sensitivity is adjusted, move the stick up side to complete the adjustment.
13
♣In vehicle recording is selected.