Installation - Gemini NCB-D200-IR User Manual

Installation

★Caution
- Do not install on the rain sensor or radio block as the picture left
GPS signal may not be detected.
- Check the followings before installation
SD Memory Card, DC Cable, AV Cable. Drivers Viewing Angle
.
1. Installation
1) Clean dust on the windshield surface as the
picture.
2) Strip the tape cover of bracket.
3) Attach the device on the required position.
Firmly attach it for safe mounting.
4) Open lens cover.
5) Insert SD Memory Card.
6) Plug the power cord in.
2. Wiring
1) Wiring Cigar Lighter Power
*Finish wiring work as the picture bellow.
2) Continuous Power Wiring
*Open Fuse Box and find a proper connection
terminal to get continuous power.
*Continuous power wiring has to be done at
10