Firmware Upgrade; Specifications - Gemini NCB-D200-IR User Manual

Firmware Upgrade

① Remove the SD Memory Card from the device and attach it to the memory card reader.
② Connect the memory card reader to the USB port of the computer.
③ Format SD Memory Card.
④ Download the upgrade file from homepages and unzip the file.
⑤ Copy the unzipped file and paste the file to SD Memory Card.
⑥ Insert SD Memory Card to the device and power on.
Caution
Do not disconnect the power cable or turn the vehicle‟s engine off while upgrading.
Do not remove the SD memory card while upgrading.

Specifications

Model
Image Sensor
Effective Pixels
Lens
Audio Recording
Speaker
Storage
GPS
G-Shock
Operating Temp.
Power
Dimensions
Weight
NCB-D200-IR
CMOS 1/4"
656 X 496
Inside
168˚(D), 129˚(H), 94˚(V)
Outside
68˚(D), 58˚(H), 42˚(V)
MIC built-in
0.3W Speaker
SD Memory Card(2GB ~ 32GB)
GPS Module built-in
3D G-Shock Sensor built-in
-20˚c ~ +70˚c
DC 12V ~24V (3.2W)
89mm x 117mm x 52mm
122g
19
NCB-D200-TW
Foreside Wide
116˚(D), 92˚(H), 68˚(V)
Foreside Tele
31˚(D), 24˚(H), 18˚(V)
DC 12V ~24V (3W)
121g