Operating Range Of Remote Control Unit; Display - Pioneer VSX-RS320-k Operating Instructions Manual

02 Controls and displays
ADVANCED SURROUND
Switches between the various surround
modes (page 26).
STANDARD SURROUND
Press for Standard decoding and to switch
between the various 2 Pro Logic II options
(page 25).
9 MULTI ZONE controls
If you've made MULTI-ZONE connections (see
MULTI-ZONE listening on page 35) use these
controls to control the sub zone from the main
zone (see Using the MULTI-ZONE controls on
page 36).
10 TODOROKI MODE
Press to switch on/off the TODOROKI mode
(page 27).
11 PORTABLE audio input jack
Connect an auxiliary component using a stereo
mini-jack cable (page 21).

Display

1
1 PHASE
Lights when the Phase Control is switched on
(page 28).
2 AUTO
Lights when the Auto Surround feature is
switched on (see Auto playback on page 25).
8
En
2
10 11
Operating range of remote control
unit
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver's remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that is
emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
3 4 5 6
12 13
3 ST
Lights when a stereo FM broadcast is being
received in auto stereo mode.
4 TUNE
Lights when a broadcast is being received.
30°
30°
7 m
7 8 9
14 15 16