Flow Of Settings On The Receiver - Pioneer VSX-RS320-k Operating Instructions Manual

Flow of settings on the receiver

The unit is a full-fledged AV receiver equipped
with an abundance of functions and terminals.
It can be used easily after following the
procedure below to make the connections and
settings.
1
Before you start
• Checking what's in the box (page 6)
• Loading the batteries (page 6)

2
Connecting the speakers
Where you place the speakers will have a big
effect on the sound. Place your speakers as
shown below for the best surround sound effect.
• Placing the speakers (page 13)
• Connecting the speakers (page 14)
Subwoofer (SW)
Front
Left (L)
Center (C)
Surround
Left (SL)

3
Connecting the components
For surround sound, you'll want to hook up
using a digital connection from the BD/DVD
player to the receiver.
• About video outputs connection (page 16)
• Connecting a TV and playback components
(page 17)
• Connecting antennas (page 22)
• Plugging in the receiver (page 23)

Front
Right (R)
Surround
Right (SR)
Listening
position
The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary

4
Power On
Make sure you've set the video input on your TV to
this receiver. Check the manual that came with
the TV if you don't know how to do this.

5
The Input Assign menu (page 34)
(When using connections other than the
recommended connections.)

6
Playback
• Basic playback (page 24)
• Selecting the audio input signal (page 25)

7
Adjusting the sound as desired
• Using the various listening modes
• Using the Sound Retriever (page 28)
• Using Phase Control (page 28)
• Setting the Audio options (page 29)
• Manual speaker setup (page 32)
5
En