Berghoff 1810027 - 2216743 Manual page 18

Induction cooktop tronic-line
Hide thumbs Also See for 1810027 - 2216743:
Table of Contents

Advertisement

Specific for 18100027 - 2213735 - 2216743
Before turning on the power, make sure the cookware is on the ceramic plate with ingredients
inside. To turn the power on, press the ON/OFF button once. The power light will turn a steady
red and heating will begin. To select the proper heat setting, press the +/- keys until the correct
heat setting is achieved.(defaults=5, heating steps 1-10). To select temperature setting, press
the" Temp" button once, the temperature light will turn a steady red ,and press the +/- keys until
the correct temperature setting is achieved (default=70°F, Temp levels between 150°F - 450°F /
steps of 0°F).
To select automatic timer setting, press the" Timer" button twice (defaults =0 mins),the timer light
will turn a steady red, and press +/- key until the correct timer setting is achieved. Once the time
is up, an acoustic signal sounds and the device automatically goes into standby mode. Press the
ON/OFF button to restart the unit.
Specific for 18100119 - 2216736
Press the ON/OFF one second to turn the induction hotplate on.  T he power control lamp in the
display blinks and an acoustic signal sounds.
Press the Function Key HEAT once. The preset power stage "5" is selected and the device turns
on. With the + / - Keys, you can change the settings at any time in a range from 1 – 10.
When you start up the second side at HEAT function, and first is at level "5", the other side will
start to adjust the heating level. The max level of two sides is 10. One side at the HEAT function,
the other side is at the TEMP function, the max of the HEAT function is "5".
Press the Function Key TEMP. once to select the temperature. The preset temperature stage
"70°F" is selected and the device turns on.
With the + / - keys, you can change the settings at any time in a range from 150-450°F. (in tem-
perature stages of 0°F)
Timer Function.  A fter selecting of the temperature mode press the button TIMER key once.
The display shows the number "0". With the + / - keys, you can now select the operating time:
increasing in 5 mins (up to max. 150 minutes), reducing 1 min. The display counts down the dura-
tion in minutes. Once the time is up, an acoustic signal sounds and the device automatically goes
into standby mode. Press the ON/OFF button to restart the unit.
!
! READ BEFORE USE !
Earthchef portable double induction cooktop
VERY IMPORTANT INFORMATION ON THE POWER-SHARING FEATURE:
This innovative appliance uses smart technology as a power-sharing unit.
- 18 -

Advertisement

Table of Contents
loading

Table of Contents