E. Operating The Cooktop - Berghoff 1810027 - 2216743 Manual

6E. Operating the cooktop

General for all induction stoves:
Plug the power cord into a suitable outlet.

A beep signal sounds when the cooktop is in standby mode.

Place induction suitable cookware in the center of the cooking surface.

Now press the ON/OFF switch to turn the induction cooktop on. The control lamp

"POWER" or " HEAT" blinks and an acoustic signal sounds and the unit will start to
work at a default Power stage.

!
Important: You can switch between TEMP cooking , POWER cooking and TIMER at any time by
pressing the FUNCTION button.
The device will start working at default powerlevel, but we recommend to use the TEMP mode by
following steps:
Turn the unit to the "ON" position by pressing the Power button.

Place cookware on the unit.

Select the TEMP button (or choose with the function button TEMP).

Adjust the up and down Arrow Keys until the desired cooking temperature appears on

the LED display.
Turn the unit off by pressing the Power button.


!
NOTE
If the unit is left on and unattended without a pan for more than 9 seconds it will turn off. The
LED will tell you it is in off mode. To exit this mode press the power button back to on.
A thermostat monitors the temperature of the bottom of the pan. For actual food temperature a
thermometer should be used.
Specific for 2207123
• "POWER"
The pre-set power stage "100 W" is selected and the device turns on (power stages: 00 –
1800 W). With the arrow keys, you can change the settings at any time in a range from 00
– 1800 W. The LED-display "WATT (w)" flashes up. (1/2 the max powersetting, depending on your
model (1300W for 2207123), will be the auto-start setting when the unit is first activated ).
- 16 -