B. Commercial Use And Safety Instructions Of This Appliance - Berghoff 1810027 - 2216743 Manual

Read all instructions carefully
Remove unit from carton
Remove all loose packing materials and accessories
It is the responsibility of the installer to comply with all federal and local codes. Warranty of this
unit is automatically voided upon any installation not matching the specifications discussed in this
manual. BergHOFF recommends a dedicated electrical line be used for each unit installed. Do not
share electrical circuits with any other electrical appliance and/or equipment.
BergHOFF's Induction Cooktop has been ETL tested and approved. For single units only
5. Safety
This segment provides a summary of important safety aspects.
Every chapter provides specific safety tips to avoid danger which is highlighted by the above
mentioned symbols.
In addition, pay attention to all pictograms, markers, and labels on the appliance which must
always be perfectly legible.
Following all the important safety advice, you gain an optimal protection against all hazards as
well as the assurance of a safe and trouble-free operation.
5A. General information
This appliance is designed in accordance with the presently valid industrial standards. However,
the appliance can pose a danger if handled improperly or inappropriately. Knowing the contents
of the manual, as well as avoiding mistakes and thus operating this appliance safely and in a
fault-free manner, is essential to protect yourself from any danger. To ensure efficiency and
safety, no modifications or alterations are to be made to this appliance unless they are approved
by the manufacturer. This appliance may only be operated in proper and safe conditions.
5B. Commercial use and safety instructions of this appliance
Regarding industrial safety, the specifications are based on the regulations of the ETL, NSF, FCC
applicable at the time of manufacturing the appliance. If the appliance is used commercially,
the user is obliged to guarantee that the industrial safety measurements coincide with the rules
and regulations applicable at that specific time for the entire period of use of the appliance and
must comply with the new specifications. Outside the European Union, the industrial safety laws
applied at the place of installation of the device and the regional territorial provisions, must be
complied with.
Besides the industrial safety instructions in the instruction manual, the general safety and
accident prevention regulations as well as environment protection regulations applicable for the
- 11 -