Helpful Advice Before Installation
Please retain all packaging until you have checked and counted all the parts and other package
It is recommended to place your fireplace near an existing outlet, for ease of electric connection.
Store your fireplace in a dry, safe and dust-free place while drilling, for fireplace installation.
Do not attempt to wire new outlets or circuits. To reduce the risk of fire, electric shock or injury
to persons, always have a licensed electrician perform maintenance and other repairs.
Description of Parts
1. Flame Brightness Control Knob
2. Flame effect
4. Heat 750W
5. Fan (No Heat)
6. Thermostat Control Knob (Heat Adjustment)
Instructions for Use
This fireplace can be operated with the switches located on the top panel of the fireplace.
Plug the fireplace into a power outlet.
Select the desired function:
Only Flame Effect On / Off – (Flame Effect Switch – labelled as 2)
Fan (No Heat) – (Fan Switch – labelled as 5)
Low Heat – (750W Switch – labelled as 3)
High Heat – (Both 750W Switches – Labelled as 3 & 4)
Heat & Flame Effect – (Turn on all the switches)