Removing & Installing Body Components; Seat - Honda Motorcycle User Manual

Removing & Installing Body Components

Seat

Prongs
Front stay
Seat unlock lever
52
❙
Removal
1. Insert the ignition key into the helmet
holder, and turn it clockwise.
Seat
2. Pull the seat unlock lever downward to
unlock the seat.
3. Pull the seat back and up.
Rear stays
❙
Installation
Helmet
holder
1. Insert the front and rear prongs into the
front and rear stays on the frame.
2. Push forward and down on the rear of the
seat until it locks in place. Make sure that
the seat is locked securely in position to
Ignition key
pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
underseat compartment.