Honda Motorcycle User Manual page 73

Drive Chain u Checking the Drive Chain Slider
❙
Checking the Drive Chain Wear
Check the chain wear label when adjusting
the drive chain. If the red zone on the label
aligns with the rear end of the swingarm
after the chain has been adjusted to the
proper slack, the chain is excessively worn
and must be replaced.
Replacement Drive Chain:
DID50ZVM2 or RK50LFOZ2
If necessary have the drive chain replaced by
your dealer.
70
Checking the Drive Chain Slider
Check the condition of the drive chain slider.
The drive chain slider need to be replaced if a
chain slider is worn to the wear limit line. If
necessary have the drive chain slider replaced
by your dealer.
Wear limit line
Rear end
of the
swingarm
Red zone
Drive chain slider