Witura WT-9002 Instructions Manual

GSM Intercom Remote Control and Alarm System
Introduction
The New GSM Intercom WT-9002 has been designed as a system to communicate via a fixed call
Point to either a land line or Mobile using the GSM Network without the requirement of any
cabling from the gate entry to the point of contact and also eliminating the problems that occur
with long range wireless systems as this system has no range barriers as long as an acceptable
GSM-Network is available at the site location.
This system also allows the person called to operate two separate relays using the key pads on
either the Land Line or Mobile Phone regardless of the location or distance apart and these may
represent a gate and a door or entrance lights etc
Other features include a Battery Backup to alert you when the mains power fails at the gate and
the system can also sound an audible alarm in the event the power fails to further alert the
property owner.
The system comes with a complete GSM Interface in an IP 65 Enclosure and a Stainless Steel
external Call-Point requiring only a 6 wires connection between the Interface and the Call Point.
The system also has the facility to store up to 1000 authorized users who can access the system
via Mobile phone or Landline and these numbers can be programmed via text messaging or using
the software package provided with the system.
It is also possible to change or override the parameters of both the output relays remotely via
Installation of the Interface and Call point
SMS and receive confirmations of these commands and add and remove authorized users without
having to be present on site or again use the software package provided with the system.
The Interface is housed in a back flanged IP65 Rated Enclosure and can be located and fixed
without having to open the cover or requiring any internal fixings within the enclosure making
it a secure and waterproof Installation giving maximum protection for the control equipment
inside.
The Call Point is a two piece fixing with the shield located and fixed and the main Intercom
fascia locked into place and secured via the security fixing on the under frame of the casing
and again providing a very secure vandal resistant and waterproof housing.
It is advised the distance from the Interface to the Call Point des not exceed 3 meters and it
is also advised to install at least an 8 core in the event you may want to use a backlight
version of the call point or change at a later stage to a Keypad or Camera version available
later this year.
1 | P a g e
WT-9002 GSM Intercom And Access Control System User Manual V2.8
Product Model: WT-9002 – V2.8