Table of Contents
Advertisement
H4X
1
ON•OFF
PROFILES/ESC
3
AF
Load
1
ON•OFF
PROFILES/ESC
3
AF
Load
5
DRIVE
Save
2
2
F
R
4
ON•OFF
PROFILES/ESC
3) Use the scroll bar to go through the list of profiles. Choose a
Spare profile or a named profile (except Default). You can
either save the new profile under the original name or you
can change it
4) Press Save (DRIVE button). The Profile name screen is then
displayed where you can rename the profile to what suits you
(see under Image Info 4.2 for procedure details).
To use a profile from the main screen, press the PROFILES button
to reach the profiles screen again. Scroll down the list to the pro
file you want and then press the Load (AF) button. All the saved
settings will then be automatically implemented.
If you decided to change the settings but nevertheless keep the
Profile name on the list, the new set of parameters will be retained
under that name. That is to say, the settings will not be the same
as listed here, despite the name. It might be safer practice to
always change the profile name to avoid later confusion.
Using profiles
1) From the main screen, click PROFILES (ON.OFF button) on
the grip and the profile screen will appear.
2) Use the scroll bar to go through the list and highlight the
desired profile.
3) Press Load (AF button). The camera is now set according to
all the parameters stored according to the name.
Changing a profile name
You can change a profile name (except 'Default') at any time.
Proceed as follows:
1) From the main screen, click PROFILES (ON.OFF button) on
the grip and the profile screen will appear.
2) Scroll through the list (front or rear control wheels) and high-
light the desired profile.
3) Press Load (AF button).
4) Click PROFILES (ON.OFF button) again.
5) Press Save (DRIVE button) The Profile name screen is then
displayed where you can rename the profile to what suits you
(see under Image Info 4.2).
ISO/WB
46
N o t e
T i p
To quickly reset all profiles back to the
original factory settings:
1. Remove battery.
2. Wait 5–10 seconds.
3. Replace the battery while keep
MENU
ing both the Menu and IS0/WB
buttons pressed.
Advertisement
Table of Contents
