Basic Operations; Turning On The Power - JVC KD-SX985, KD-SX885 Instructions Manual

Turning on the power

1
Turn on the power.
"HELLO" appears on the display.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To select the tuner, press FM AM
repeatedly.
FM1
AM
To select CD, CD changer (or "LINE IN"*),
press CD CD-CH (AUX) repeatedly.
* If "LINE IN" does not appear on the display,
see page 29 and select the external input
("LINE IN").
To select "AUX IN" (component connected
to the AUX INPUT jack on the control panel),
press and hold CD CD-CH (AUX).
1 3
FM2
FM3
CD
CD-CH
(or LINE IN)*

BASIC OPERATIONS

3
Adjust the volume.
Volume level appears
4
Adjust the sound as you want.
(See pages 23 – 25.)
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press for more than one second.
"SEE YOU" appears, then the unit turns off.
• If you turn off the power while listening to a
disc, CD play will start from where playback
has been stopped previously, next time you turn
on the power.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 26.
2
To increase the volume.
To decrease the volume.
Volume or audio level
indicator (see page 28)
7