Miele CVA 2650 Operating Instructions Manual page 99

www.dexpress.com
8.2 How to do it
www.dexpress.com
Cond Inst Page 99 of 105
Cond Inst Page 99 of 105
The appliance must only be connected by an
authorised specialist, paying attention to the
relevant regulations of the power supply companies
and the regional construction regulations.
The electrician is responsible for the correct
functioning of the appliance at the time of installa-
tion. He must instruct the user on how to operate
the appliance correctly on the basis of the
Operating Instructions, and the user must be
instructed on how to disconnect the appliance
in an emergency.
We accept no liability for damage caused by
failure to comply with these instructions.
Repairs carried out improperly may involve
substantial risks for you.
Connection to the power mains
On the top of the appliance there is a cover that
has to be unscrewed. The wiring diagram stuck
onto the top of the appliance shows the connection
variant.
The power mains to which the oven/cooker is to be
connected is fused with 16 A (EB 270)/20 A (EB 290)
in each phase.
The appliance must be earthed.
The manufacturer cannot be held liable for
damages that might arise from improper or non-
existent earthing of the appliance.
Screw the cover back on.
For installation in Canada only:
When you install the appliance you need a special
fuse-box with circuit breakers which have to be
connected between the appliance and the socket.
When installing the fuse box and circuit breakers
please make sure that you have installed the right
breakers in each circuit. Please contact your dealer
or an electrician.
Follow the information on the enclosed wiring
diagram for connection details.
EB271630 12/31/2010
EB271630 12/31/2010
37