Fault Messages; Mfr Sup - Miele CVA 2650 Operating Instructions Manual

Coffee systems built-in coffee system
Hide thumbs Also See for CVA 2650:
Table of Contents

Advertisement

www.dexpress.com

Fault messages

If an error occurs a fault message will appear in the right display. Minor problems
can be fixed without a service call.
Message
Chamber empty -
please refill
Please fill with fresh water This is a reminder to fill the water tank
Please set the time of day The machine was disconnected from
Empty drip tray and clean
contacts
Please use descaling
funnel and close the door
Please insert capsule
plate
Please insert carousel
Please open the valve
Please close the valve
Maintenance required
Confirm to start
Confirm to continue
Empty
No. of uses until
descaling has to be done
www.dexpress.com
46

Mfr Sup

Possible fault
The selected coffee chamber is empty.
with fresh water when the machine is
turned on.
the power supply and the time of day
needs to be reset.
The drip tray is full and the metal
contact sensors in the tray are soiled.
The capsule plate needs to be taken out
and replaced by the descaling funnel.
The capsule plate or perforator are
missing or the descaling funnel is still in
the machine.
The carousel is missing or the sensor
under the carousel tray is soiled.
Steam cannot be supplied if the steam
valve is closed.
The steam lever is still pressed down.
The capsule carousel needs to be
replaced after about 15,000 cups of
coffee.
The selected process is prompted to
start.
The descaling needs to be continued.
A coffee chamber was selected which
has not been allocated to a coffee type.
The machine counts the number of
drinks made before descaling has to be
carried out. Once this number reaches
zero, the machine locks until the
descaling process has been
successfully completed.

Mfr Sup

Page 55 of 105
Fix
Fill with coffee capsules.
Set the time of day.
Empty and clean the drip tray.
Clean and dry the contacts.
Remove the capsule plate and
insert the colored funnel.
Insert the capsule plate or
perforator.
Insert the carousel and clean
the sensor with a cloth.
Press the steam lever down.
Push the steam lever up.
Turn the left jog shuttle to
"Settings". Turn the right jog
shuttle to maintenance and
change the perforator (see
"Common coffee system care -
Maintenance").
Press the right jog shuttle.
Press the right jog shuttle.
Allocate a type of coffee to the
chamber.
Descale the machine
(see "Descaling the
appliance").
Page 55 of 105
CVA
CVA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents