Miele CVA 2650 Operating Instructions Manual page 15

Coffee systems built-in coffee system
Hide thumbs Also See for CVA 2650:
Table of Contents

Advertisement

www.dexpress.com
IMPORTANT SAFETY INSTRUCTIONS
Installation work and repairs should
only be performed by a trained
technician in accordance with national
and local safety regulations. Repairs
and other work by unauthorized
persons could be dangerous.
Never open the outer casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
dangerous and may cause machine
damage.
If the machine is installed in
combination with other appliances,
it should be installed with a protective
base between the appliance and the
unit.
To protect against fire, electric
shock and injury to persons do not
immerse cord or plugs in water or other
liquid.
Do not let cord hang over edge of
table or counter, or touch hot
surfaces.
Do not operate any appliance with
a damaged cord or plug or after
the appliance malfunctions, or has
been damaged in any manner. Return
appliance to the nearest authorized
Miele dealer for examination, repair or
adjustment.
Always attach plug to appliance
first, then plug cord into the wall
outlet. To disconnect, turn the machine
off by pressing the left jog shuttle, then
remove plug from wall outlet.
www.dexpress.com
6
Mfr Sup
Use
Use only Nespresso-coffee
capsules with this machine.
The coffee system must be cleaned
daily to prevent the growth of
harmful bacteria and mold. Please
read the "Coffee system care"
section of this booklet.
Caution! There is a risk of burns
when dispensing hot beverages,
they are extremely hot.
Do not touch hot surfaces. Use jog
shuttles or steam lever.
Children should not use the
appliance unsupervised.
Danger of scalding!
This appliance must not be
installed or operated outdoors.
To avoid injuries allow the coffee
system to cool before cleaning or
before putting on or taking off parts.
Turn the machine off at the main switch
when not in use and before cleaning.
Only fill the water tank with cold,
fresh tap water. Warm or hot water
or any other liquids may damage the
machine. The water should be changed
daily to prevent bacteria or mold
growth.
Mfr Sup
Page 15 of 105
Page 15 of 105
CVA
CVA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents