Fault Messages - Miele CVA 2650 CVA 2650 Operating Instructions Manual

Fault messages

If an error occurs a fault message will appear in the right display. Minor problems
can be fixed without a service call.
Message
Chamber empty -
please refill
Please fill with fresh water This is a reminder to fill the water tank
Please set the time of day The machine was disconnected from
Empty drip tray and clean
contacts
Please use descaling
funnel and close the door
Please insert capsule
plate
Please insert carousel
Please open the valve
Please close the valve
Maintenance required
Confirm to start
Confirm to continue
Empty
No. of uses until
descaling has to be done
46
Possible fault
The selected coffee chamber is empty.
with fresh water when the machine is
turned on.
the power supply and the time of day
needs to be reset.
The drip tray is full and/or the metal
contact sensors on the tray are soiled.
The capsule plate needs to be taken
out and replaced by the descaling
funnel.
The capsule plate or perforator are
missing or the descaling funnel is still
in the machine.
The carousel is missing or the sensor
under the carousel tray is soiled.
Steam cannot be supplied if the steam
valve is closed.
The steam lever is still pressed down.
The perforator needs to be replaced
after about 15,000 cups of coffee.
The selected process is prompted to
start.
The descaling needs to be continued.
A coffee chamber was selected which
has not been allocated to a coffee type.
The machine counts the number of
drinks made before descaling has to
be carried out. Once this number
reaches zero, the machine locks until
the descaling process has been
successfully completed.
Solution
Fill with coffee capsules.
Set the time of day.
Empty and clean the drip tray.
Clean and dry the contacts.
Remove the capsule plate and
insert the colored funnel.
Insert the capsule plate or
perforator.
Insert the carousel and clean
the sensor with a cloth.
Press the steam lever down.
Push the steam lever up.
Turn the left jog shuttle to
"Settings". Turn the right jog
shuttle to maintenance and
change the perforator (see
"Common coffee system care -
Maintenance").
Press the right jog shuttle.
Press the right jog shuttle.
Allocate a type of coffee to the
chamber.
Descale the machine
(see "Descaling the appliance").