Control Options - GE TruVision DVR 30 Quick Start Manual

Figure 2: Front panel
e
TruVision DVR 30
TM
USB USB
4

Control options

There are several ways to control the TVR 30:
• Front panel control
• IR remote control
• Mouse toolbar control
• Web browser control
Front panel control
The buttons on the front panel control most functions. See
Figure 2 above for locations of the controls.
Table 2: Front panel control descriptions
Item Name
1 Numeric buttons
2 Menu and Esc
controls
3 Directional controls
and Enter button
4 USB ports
5 CD/DVD drive
TruVision DVR 30 Quick Start Guide
1
9
Archive
5 6
Description
Display the corresponding video in full
screen while in both live and playback
mode. The number of the button
corresponds to the camera number.
Press and hold a numeric button for two
seconds to display the corresponding
video on the spot monitor.
While in PTZ mode, press the 1 button to
access the Set/Go Preset menu.
Press Esc to exit a screen or cancel a
selection. Press Menu to display the main
menu.
Use the arrow buttons as directional keys
in zoom mode.
While in a setup menu, use the Left or
Right Arrow keys to navigate through
fields. Use the Up or Down Arrow keys to
change the value of a selected field. Press
Enter to confirm the selection or display
additional screens.
Connect USB devices.
Insert media for archiving.
1
2 3 4 5
10 11 12 13 14
REC
PTZ
Seq
7 8
Item Name
6 Archive button
7 Status LEDs
8 Function buttons
9 Playback controls
IR remote control
The IR remote control buttons are similar to those on the
TVR 30 front panel. You can use the remote control to
perform any TVR 30 function.
To place batteries into the IR remote control:
1. Remove the battery cover.
2. Insert the batteries (AAA). Make sure that the positive
and negative poles are correctly placed.
3. Replace the battery cover.
To connect the remote control to the TVR 30:
1. Turn on the TVR 30 and wait for live video to appear.
2. On the remote control, press the DVR ID button, and
then press the 1 button.
3. The remote control is now operational.
2
ESC
6 7 8
15 16
MENU
Display Search Live
9
Description
Begin archiving or display the Archive
screen.
Press once to begin copying a video
segment for export while in playback
mode. Press again to stop copying.
Display device status and conditions. See
Table 1 on page 2 for more information.
Change the TVR 30 operating mode. For
example, press PTZ to go into PTZ mode.
See "Operating modes" on page 21 for
more information.
Control video playback speed.
3
3